Filter By:
- Rigid (18)
- Suspension (5)
- Show More Brands
- Show Fewer Brands
Forks

$19.99 - $23.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels

$36.99 - $62.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels

$51.99 - $59.99
• Caliper brake mounts
• 45mm rake
• Chromoly construction
• Threadless fork
• 300mm steerer length

$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

$209.00
Salsa Cro Moto Grande Fork 29".
- Disc only 29" rigid fork
- Suspension corrected for 80mm travel fork
- Maxle Included
- Axle to Crown Length: 483 mm
- Brake Mount (Fork): IS Disc Brake 160
- Crown Race: 40
- Front Axle: 15mm Thru x 100mm
- Material: Chromoly Steel
- Offset: 45 mm
- Wheel Mount Center Offset (mm): 0
- Steerer Tube Length (mm): 260 mm
- Weight: 1080 g

$130.00
Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out.
- Salsa Classico CroMoly
- Forward-facing, stainless steel dropouts
- 1-1/8? threadless steerer (260mm)
- 468mm axle-to-crown
- 45mm rake
- ISO disc tabs
- Tire clearance = 90mm
- Fender eyelets
-1080g with full-length steerer tube

$569.00
The Cutthroat carbon fork is full of features, ready for any adventure.
- Full Carbon fork, tapered steerer
- Fits 29 x 3.0" tires
- Three-Pack mounts
- Crown light mount
- Includes Salsa Deadbolt Ultralight Thru-Axle
- Axle to Crown Length: 483mm
- Brake Mount (Fork): Flat Mount 160mm
- Color: Matte Black
- Crown Race: 40mm
- Defined Color: Black
- Front Axle: 15mm Thru x 110mm
- Material: Carbon
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6mm
- Steerer Type: Tapered
- Steerer Tube Length (mm): 350mm
- Weight: 730g
- Wheel Size: 29" , 29+
- Max Rotor Size (Fork): 180mm
- Maximum Tire Clearance (Fork): 77mm

$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160mm minimum rotor size; 180mm maximum rotor size
- Mid-blade mounts for low rider racks
- Compatible with wheel sizes: 27.5+, 29", 29+, 700c
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- BOOST 110 x 15mm thru axle included
- Front Axle Size: 15 x 135L, TP=1.5, TL=10
- Internal routing for 110 BOOST dynamo hubs

$569.00
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160 minimum rotor size; 203mm maximum rotor size
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- Mid-blade mounts for low rider racks
- Internal routing for 150mm spaced dynamo hubs
- Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0"
- 150 x 15 mm thru axle included
- Front Axle Size: 15 x 198L, TP=1.5, TL=9

$569.00
The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset.
- Thru-Axle included
- Axle-to-Crown Length: 405mm
- Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length
- Color: Black
- S.H.I.S. Crown Race: 40mm, 36°, integrated crown race
- Fork Rake: 50mm
- Front Axle Type: 12mm thru-axle
- Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm
- Front Hub Spacing: 100mm
- Material: High-modulus carbon fiber
- S.H.I.S. Clamp Diameter: 28.6mm
- Steerer Tube Length: 350mm
- Steerer Type: 1-1/8" to 1-1/2" tapered
- Weight: 520g
- Max tire size: 700c x 45mm or 650B x 51mm

$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.
- Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included)
- Noise management system for near silent performance
- Integrated air assist for progressivity and bottom-out control
- External preload adjuster to dial-in sag and firmness off the top
- Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers
- Additional springs sold separately to fine-tune and adjust for rider preference
- Rake: 44mm

$729.00
The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard.
- Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end
- Legendary Bomber durability with 36mm stanchions
- Buttery and easy-to-use GRIP damper
- Tapered steerer tube for maximum stiffness
- Adapters available for 15 x 100mm axle
- 1.5 Tapered steerer
- Offset: 37mm

$89.99
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets
- Chromoly tubing
- Cantilever mounts only (no disc mount)
- Axle to Crown Length: 395mm
- Brake Mount (Fork): Canti Studs
- Crown Race: 30
- Front Axle: 10mm x 100mm
- Maximum Tire Clearance (Fork): 3.8
- Offset: 45mm
- S.H.I.S. Stem Clamp Diameter: 25.4
- Steer Tube length: 260mm
- Steerer Type: Straight
- Weight: 1000g
- Wheel Size: 26-inch

$89.99
700c Hybrid fork with Cantilever Mounts
- Forged dropouts with eyelets, straight-gauge oval-tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- Welded unicrown construction
- Clearance for 50mm wide fenders (1 1/8-inch)
- Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch)
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch)
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50 mm
- S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch)
- Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch)
- Steerer Type: Straight
- Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch)
- Wheel Size: 700c

$89.99
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets, welded unicrown construction
- Designed for short-reach caliper brakes
- 25 x 14mm tapered oval blades
- Axle to Crown Length: 374mm
- Brake Mount (Fork): Short Reach Caliper (39mm-49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300
- Steerer Type: Straight
- Weight: 773g (1-inch); 780g (1 1/8-inch)
- Wheel Size: 700c

$1,050.00
The best XC suspension fork in the world.
The smoothest, most advanced, most precise-handling XC fork ever made. For pure XC performance, Lefty Ocho stands alone.
Where it thrives:
In competition, challenging trails
What it's built for:
Precision, control, efficiency
Highlights:
- Lightweight aluminum upper and lower legs High-flow
- Chamber Damper with self-balancing air spring
- Remote lockout lever

$1,575.00
Ride all over.
The ultimate built-for-gravel suspension fork with 30mm of smooth, bump-taming suspension and an incredibly stuff, precise-handling structure.
Where it thrives:
Any road it goes on, challenging trails, up and down hills
What it's built for:
Precision, control, efficiency
Highlights:
- Spring progression tunable via Ramp Rings / All Over damper for pedaling stability / 30mm of travel
- Air spring, rebound, and lockout (with blowoff), adjustments / fits: flat mount brakes and Lefty 50 hubs
- 1 1/8"-1 5" tapered steerer / Max tire size: 700c (45mm), 650b (47mm) / weight: 1340g

$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.

$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and tire clearance for big tires. Lifetime warranty.

$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design

$100.00
The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike.
- Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts
- Axle to Crown Measurement: 375mm
- Offset: 32mm
- Steerer Tube Length: 300mm
- Spacing: 100mm
- Tire Clearance: 32c
- Brakes: Mid Reach

$225.00
Featuring a custom fork crown and elegantly curved blades inspired by classic randonneuring forks, the All-City Space Horse Fork comes outfitted with four-pack rack mounts to accept a variety of front rack styles. Signature fork ends accommodate 12mm thru-axles and flat-mount brakes, E.D. coating offers protection from rust, and a liquid black paint finish adds shine to its timeless silhouette.
- 100% 4130 Chromoly tapered blades and matching signature fork ends
- Custom-designed lugged fork crown, four-point rack mounts, stealth dynamo routing
- 700c x 45mm maximum tire clearance; 41mm with fenders
Specifications:
- Brake Mount (Fork): Flat Mount 160
- Wheel Size: 700c
- Brake Type: Disc
- Crown Race: 30.0
- Steerer Type: Straight
- Offset: 52
- Material: Steel
- Steerer Tube Length (mm): 350
- Maximum Tire Clearance (Fork): 700c x 45mm or 650B x 47mm
- Front Axle: 12mm Thru x 100mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Front Hub Spacing (mm): 100
- Axle to Crown Length: 395
Page 1 of 1