Other
$8.79
$10.99
20% Off
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$22.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$4.00
$5.00
20% Off
Campagnolo small parts for bottom brackets.
$8.79
$10.99
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$8.80
$11.00
20% Off
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.
$9.20
$11.50
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$9.59
$11.99
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$10.39
$12.99
20% Off
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$14.39
$17.99
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$19.20
$24.00
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$20.00
$25.00
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$23.20
$29.00
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$23.99
$29.99
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$23.99
$29.99
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$27.19
$33.99
20% Off
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$11.60
$14.50
20% Off
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 1526 Bearing for Rear Driveside Spline 1200, 2nd Generation Spline1501 and Dicut Disc Wheels
$11.60
$14.50
20% Off
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
$11.60
$14.50
20% Off
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$38.16
$47.70
20% Off
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control.
- Allows for easy installation on Rock Shox Torque Cap compatible forks
$72.24
$90.30
20% Off
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Includes end cap for 12 x 142 and 12 x 148mm hubs
Fits Shimano 12-speed Micro Spline cassettes
Crafted from lightweight aluminum
Compatible with 12mm thru-axles
$92.40
$115.50
20% Off
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 54T
$15.19 - $18.99
$17.99 - $18.99
Up to 20% Off
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
$26.00
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
$42.00 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$6.40
$8.00
20% Off
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$19.76
$24.70
20% Off
ABI Headset Bearing for new builds or replacements.
$28.00
$35.00
20% Off
ABI Headset Bearing for new builds or replacements.
$12.00
$15.00
20% Off
Air spring seal kits for Fox suspension repair and rebuild.
Page 1 of 6
Next page